Using Claws Mail with other programs

From Claws Mail FAQ
Revision as of 14:57, 1 May 2006 by Claws (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

How can I use Sylpheed-Claws with bogofilter?

First of all, make sure you have trained bogofilter; for different training methods, see http://bogofilter.sourceforge.net/faq.shtml#training. Method 4 is recommended, but requires a large number of ham and spam messages.

Add a new filtering rule: you need a filtering condition which runs bogofilter on incoming messages; and an action that has to be performed if the message was recognised as spam. Go to the Filtering Configuration dialog, and type the following in the condition entry field:

test "bogofilter -u < %F"

Note 1: this assumes that bogofilter is in your path!
Note 2: the -u parameter of bogofilter registers the message automatically as either spam or ham.

Next add an action in the Action field. The best way is to use the Define... button next to the field. As an example, if you wanted to move a spam messages to a directory called Spam, then the final action, put in the field, could look like this:

move "#mh/Mailbox/Spam"

After having added the filtering rule you probably want to create two Sylpheed-Claws Actions: one for marking messages as spam, and one for marking messages as ham. These actions can be used to correct bogofilter and/or to train it with additional messages. For example, if the above filtering rule did not detect a spam message correctly, delivering it to your inbox, you can manually correct this by invoking a "Mark As Spam" action. As an added bonus, Actions are automatically added to the main menu (under Tools|Actions), and can also be added to the main toolbar.

Open the Actions dialog (Configuration | Actions...). In the Menu name field, enter the following:

Mark As Spam

This is just the text as it would appear in the Tools|Actions submenu.

The accompanying command line for Mark As Spam should be:

bogofilter -Ns -B %F

(Don't forget to use the Add button!)

Likewise, the same thing you should do for marking messages as ham. Select "New" in the Current actions list, and enter the following in the Menu name:

Mark As Ham

The command line for this action should be:

bogofilter -Sn -B %F

And add the action by clicking the Add button.

This gives you a basic setup for bogofilter and Sylpheed-Claws.


How can I use Sylpheed-Claws with Popfile?

You can reclass messages received trough a Popfile filter with a button in Sylpheed-Claws. Popfile lives @ http://popfile.sourceforge.net/

You will need 3 things:

  • a bash script
  • a Sylpheed-Claws action
  • change Popfile configuration a bit.

The bash script:

#!/bin/bash
url=`cat $1 | grep -e X-POPFile-Link:.* -o|grep http.* -o`
firefox $url

Save it as /some/path/popreclass.sh
Change firefox to another browser executable if needed.

The action:
/some/path/popreclass.sh "%f"
You can set up a toolbar buttor for the action later

Popfile configuration
Go to http://127.0.0.1:8080/configuration, and make sure the X-POPFile-Link Header option is turned ON.
Your popfile URL might be different.

You will be able to reclass messages that were received with the above option turned ON.


How can I use Sylpheed-Claws with SpamAssassin?

To train spamassassin in Sylpheed-Claws (>=1.9.6):
Menu > Configuration > Actions
In 'Menu Name' add "Mark as Spam"
In 'Command line' add -sa-learn --spam %F-
click the Add button
Menu > Configuration > Actions
In 'Menu Name' add "Mark as Ham"
In 'Command line' add -sa-learn --ham %F-
click the Add button


then select a message, Menu Tools > Actions will have the new actions to mark your email as Spam/Ham. Once you click one of the buttons spamassassin will process your request - this takes time so be patient and dont click on the 'cancel' button.